Remove acrylic nails at home without damaging your nails is safest in the nail salon. But what to do when the nail salon is closed?
Table of Contents
There are four ways to remove acrylic nails yourself:
- Remove acrylic nails at home with acetone
- Remove acrylic nails at home with nail polish remover
- And Remove acrylic nails in a water bath
- Remove acrylic nails with a milling cutter
Remove acrylic nails – with a file & acetone
If you want to remove your acrylic nails, start by trimming the pins with the file to about a millimeter above the fingertip. Be careful not to file the natural nail with it. This works best with a coarse-grained nail file (nail file size 100/180) specially designed for acrylic nails.
Next, remove the top layer of the acrylic nails with a buffing file.
A little tip:
Be careful not to “saw” and, if possible, only file in one direction.
When there is only a thin layer of acrylic left, acetone is used. Soak a cotton ball in the solution, place it on the nail and wrap the whole thing with aluminum foil. After about 20 minutes, the acrylic layer should have turned into a rubbery mass that can be pushed off the nail with a rosewood stick.
For use. Soak a cotton ball or cellular tissue with the solution, place it on the nail and wrap the whole thing with aluminum foil. After about 20 minutes, the acrylic layer should have turned into a rubbery mass that can be pushed off the nail with a rosewood stick.
Tip: Do not get any further at home, do not try to remove the nails with force. Instead, go to the nail salon. Acrylic nails do not come off by themselves.
Removing acrylic nails is a procedure that requires a certain level of care. Acetone is harmful to the nails and skin. Therefore, in addition to hand cream, always treat your hands with a nail hardener and nail oil.
As carefully as you work with it, the nails look a bit worn after such a procedure. The best way to hide this is to use natural-looking nail polish.
As carefully as you work with it, the nails look a bit worn after such a procedure. The best way to hide this is to use natural-looking nail polish.
Remove acrylic nails with nail polish remover.
Don’t you have any acetone in stock? Then you can remove your acrylic nails with nail polish remover. It is only necessary that the nail polish remover contains acetone. Otherwise, the procedure is the same as with the acetone solution. However, if you want to remove your acrylic nails with nail polish remover, you have to expect a longer exposure time of approx. 30 minutes.
Since nail polish remover is more challenging to control, you should check for the first time after ten minutes whether the acrylic is coming off. Soaking your nails in a bowl filled with nail polish remover should be avoided out of consideration for your skin.
Finally, it is essential to pay attention to skincare, as acetone attacks the skin and nails heavily. After removing the acrylic nails, apply a hand cream to your hands and also use nail oil. If the pins are still a bit soft after removing the acrylic nails, this will happen as soon as the keratin in the natural nail hardens. In addition, it is recommended to take a nail hardener treatment. Then the pins will be strong and fit enough for the next manicure after a short time.
Remove acrylic nails without acetone – in a water bath
Sometimes even warm water can work wonders for removing acrylic nails. Especially when you mix it with soapy water.
Mix a bowl of warm water and liquid soap. Put your hands in soapy water for 30 minutes and gently shake the artificial nails again and again. So the soapy water can also get to the glue.
The warmer the water, the more likely it will work. That’s why you should always pour warm water again.
However, this method does not work with every adhesive and artificial nail. It is worth testing, however, because you are guaranteed to have soap and water at home.
Remove acrylic nail with a cutter or file.
If you want to protect your nails and remove acrylic nails yourself without acetone or nail polish remover, the only option left is to file down the acrylic on the nails.
When working with a milling cutter, caution requires in any case, as you can quickly mill too hard and thus damage the natural nails. It would help if you always used the cutter without pressure and never held it in the same place for long. Good training beforehand is advisable.
First of all, it is best to remove the cuticle at a low speed with a corresponding bit by moving quickly and without pressure along the edge of the nail. Then you use a bit to remove material, turn to a higher speed and always pull the cutter from the edge of the nail to the free end of the pin. Preferably from one side of the nail to the other so that you don’t stay in one spot for too long.
The nail burr should only use to remove the coarsest material. The rest better remove with a 100/180-grain nail file.
Of course, you can also work with just a file and remove acrylic nails yourself. It should be a 100/180 grit sandpaper file.
100 grit – Specifically for artificial fingers. For shortening or shaping tips or nails. Also suitable for pedicures.
Grit 180 – suitable for shortening or matting layers of artificial nails before modeling. To hide the tip transition. Also ideal for working on natural nails.
Also Read: How to become a police officer
